PSS Shaft Seal 1" Shaft 2 and #188;" Tube

PSS Shaft Seal 1" Shaft 2-1/4" TubeShaft Diameter: 1"Stern Tube Diameter (D): 2-1/4"Total Length (A): 6.975"Total Length (compressed) (Compressed A): 6.225"Roto
SKU: CWR-50831
Only 1 left

Availability: In stock

$248.00

This product is available to ship same business day.

Contact us if you have any questions about our products.

You may return your purchases for 30 days, see return policy for details.

Earn discounts with our Loyalty Program!


Details
PSS Shaft Seal 1" Shaft 2-1/4" Tube

Shaft Diameter: 1"
Stern Tube Diameter (D): 2-1/4"
Total Length (A): 6.975"
Total Length (compressed) (Compressed A): 6.225"
Rotor Diameter (B): 2.375"
Carbon Cuff Diameter (C): 2"
Stern Cuff Length (E): 1.5"

The PSS Shaft Seal is the number one selling marine mechanical seal worldwide and is installed as standard equipment by many of the worlds most reputable boat builders / yards. The PSS Shaft Seal is also recognized as the premiere retrofit (aftermarket) seal on the world market. Certified by Bureau Veritas, ABS and Rina: Boat builders / yards recognize the advantages and value of installing the PSS as it eliminates the maintenance, constant adjustment and cost associated with traditional packing type glands. Aside from these benefits, the PSS Shaft Seal helps to eliminate water in the bilge (100% water tight) and wear to the propeller shaft. The PSS Shaft Seal can be easily retrofitted and is available for shafts ranging from 3/4" (20mm) to 6" (150mm).

The PSS Shaft Seal is a mechanical face seal that is created between the flat surfaces of the rotating stainless steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the vessels stern tube with hose clamps and the carbon flange is attached to the front side of the bellows with hose clamps. The stainless steel rotor is fit on the shaft in front of the carbon flange. The stainless steel rotor is used to compress the bellows before the collar is secured to the shaft with set-screws. This compression (pre-load) maintains contact between the faces and allows the PSS to compensate for the thrust from the propeller. The carbon flange is bored larger than the shaft diameter allowing it to "float" around the shaft and thus compensate for most misalignment and vibration problems. The stainless steel collar is sealed to the shaft by two o-rings that are recessed into the bore of the collar. These o-rings rotate with the shaft and stainless steel rotor and do not experience wear during operation.


**As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or chemical deterioration. PYI suggests as preventative maintenance that the PSS bellow be replaced in six year intervals. During bellows replacement it is recommended the o-rings and set screws in the stainless steel rotor also be replaced."

Bellows may need to be more frequently inspected in an environment where non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate rubber deterioration, as will an ozonater.

The Maintenance Kit includes the items you need to properly maintain your PSS Shaft Seal. Included in the kit is one (1) PSS bellow, two (2) O-rings, five (5) set screws, four (4) new hose clamps and an allen key.
Additional Info
UPC Code 0839662007023
Condition New
Condition Description This product is brand new and sealed.
Package Includes PSS Shaft Seal 1" Shaft 2 and #188;" Tube
Model Number 02-100-214
MPN 02-100-214
Warranty 1 Year Warranty
Return Policy This product may be returned within 30 days for a replacement or refund. Any physical damage must be reported within 14 days of delivery.
Package Height (inches) 5
Package Length (inches) 9
Package Width (inches) 6
Weight (lbs) 2.65
Write Your Own Review

Only registered users can write reviews. Please, log in or register